How to use Waterless Car Wash by 3D Products

By Grover Koelpin 19 comments

[Music] Thanks for checking out 3D products I’m
Donald Williams, in this segment We’re going to show you how to use 3D waterless car wash using just a waterless product and towels show you how to save time and save money and be able to wash your car inside and outside without using a drop of water OK so the first thing you want to do is
take and put your 3D waterless either in like a chemical pumps sprayer pump spray here like a bug sprayer that way you can evenly distribute the product onto
the vehicle. Make sure your towels nice and clean free of any debris and fold them into fours that way you have eight towels. I like to use two towels because one
I can get damp and the other I can have dry, to buff off the surface so first thing I
want to do dampen my towel using the waterless product just so it is lightly misted and a little damp next thing you want to do is get you dirty surface nice and covered ok now the key is – That’s too little – that’s too much. You want it to do it nice and even to were it’s not dripping. Now this formula is designed to penetrate the dirt and
lift up the dirt it’s called emulsification then you take your towel it is simply
wipe it off without scratching your paint then you take a second towel and buff it off. when using waterless you want to try and make sure that you keep it in
one direction without going back over the dirt we don’t want to mush the dirt
in because it is actually lifting it off the surface but if you start to push it down then you could cause the dirt to scrub into the paint surface we feel 3D waterless product is
a great product for the windows because it will clean, lift the dirt off the
surface and can leave your streak free shine. do it the same way you would on the paint however, you don’t have to worry about scratching it like you do on the paint all the streaks are gone all the dirt is lifted, all in one step. Now 3D waterless also workes really well on the grills take it spray it down but we do have to
kind of have the right tools we recommend you to use a soft-flog
brush. Get it a little bit damp and you’ll be able to scrub out your grills here and
get in your little hard to reach places scrubbing off any of the bugs leftover
and then just take it one more quick mist and wipe it down with your towel. this is eliminating the need for a pressure washer also conserving a lot of water and really you would be doing this anyway were dry in the car off thank you for
taking the time to check out 3D Waterless car wash system. When you don’t want to grab the hose and the soap bucket get yourself a nice and wet and clean up
your car quick easy and being water conscious we appreciate your time and please subscribe to our channel to check out and keep up to date with all 3D’s
newest and latest innovative car care products [Music]


Serkan Asabi

Dec 12, 2015, 5:35 am Reply



Dec 12, 2015, 4:54 am Reply

is this a concentrate or ready to use?

Software Music Blog

Apr 4, 2016, 1:31 am Reply

Can you export the product to Brazil?

Anti Oxydant

May 5, 2016, 2:38 pm Reply

I'm very interested for my company in France. Can you export ?
How much liter gallons ?
How price ?

Sorry i don't speak english…

David Guerriero

Jun 6, 2016, 11:22 pm Reply

Got a free sample of the 3D Waterless Car Wash from an order with Auto Geek. I'm in CA and live in a condo. Translation is limited access to convenient water and drought conditions. I have been trying a bunch of waterless wash from different manufacturers. I haven't tried the 3D product yet in the list mostly because I was less familiar with 3D.

This product is without a doubt THE BEST product, in the top 2 out of a list of 7 that I have tried so far! Why you ask? First, if you haven't tried a good waterless wash, I highly recommend it – I was a total skeptic. It's mostly effective, straight forward and in the end a nice coat of wax is left behind that provides a decent shine. The removal and shine are the primary variables between different products. This product sprayed a good fine mist to cover the car, following the directions I wiped the car with higher quality micro fiber towels. It easily removed the dirt and dust. For heavy dirt, mud or snow you would definitely want to spay it down with water first then use the product as directed. 3D and all of the other products tried so far are capable of handling a decent amount of dirt and salt that might surprise you.

After the dirt and product is wiped from a panel, if necessary, repeate that step or buff to a shine with a separate, clean, high quality micro fiber towel. 3D waterless car wash buffs off very easily to a nice shine that felt slick. 3D was much easier to wipe and buff than any other product I used. I just used it last week so I am waiting to see how long it lasts. Like most of them, they advertise the shine will last a few months.

After you have finished the car one panel at a time, go back and give it a final buffing. Sometimes I use a quick spray wax for the final wipe down. Don't be afraid to explain hanger out to a clean towel.

This whole process works much better if the paint is taken care of. Time to clay, buff out some swirls and scratches. At least let a good coat of wax on it. It really makes a difference. It's worth checking out a video or two about the process and it's abilities. Get yourself a handful of good microfiber towels and medium quality microfibers. Be sure to use several towels in the process. Set them to the side as they get more saturated or dirty and use the cleaner ones, if possible, for door jams, etc later in the process. While you follow the directions and work from the top down, within that process you save the dirtiest parts for last.

It's a different process than others. It takes a few times to get your flow right and then it goes much faster. Another product to consider is a rinseless wash. Similar type of product but put a concentrate in a bucket of two gallons of water and use the same process described above.

Give 3D waterless wash a try. It is the easiest to work with and gets good results. Good luck!


Sep 9, 2016, 8:59 pm Reply

So how many microfiber towels do you need to wash a car?

Jose Ortega

Nov 11, 2016, 5:52 am Reply

does this have carnuba wax also in it?

Gonzalo Bojorquez

Feb 2, 2017, 5:26 pm Reply

Do you guys ship the products to Peru?

Aditya Perwirawan

Apr 4, 2017, 10:14 am Reply

are your product are available in indonesia?

Brian Gaskill

Apr 4, 2017, 7:06 pm Reply

I used it on my truck yesterday and it works great


Apr 4, 2018, 12:44 am Reply

Hi for the gallon do you need to dilute?

Manny Garzota

Oct 10, 2018, 11:59 am Reply

hello I'm interested of putting up carwash business here in the Philippines, how can I possibly have to get that chemical ang other car wash tools, looking forward, thanks

Jordan Maldonado

Dec 12, 2018, 1:38 am Reply

Hey guys ! Can I use Waterless with a clay bar yo decon a car? Or can I use it to lubricate the surface when I wipe off the polish's oils?, like many detailers do with Final Touch. Thank you guys 👍

Wadester P. Coletrain

Jan 1, 2019, 2:55 am Reply

Is this a "ready to use" product or a concentrated formula?

Sergio Alfaro

Jul 7, 2019, 5:23 pm Reply

Let me ask i bought a galón from the 3d store the first one its like a green color great i like the product but the second time buying this product its completely white thats normal or the just give me something different on the outside of the bottle say the same product of the first time waterless car wash 419

Yudi Koplax

Sep 9, 2019, 3:27 pm Reply

Worter kuleer untuk membersihkan air radiator apa bila tersubat kerak kapur. Apa bila bocor darurat apa bila di jalan sementara pakai plapah daun pisang oke brows.

Raymond perez

Oct 10, 2019, 4:25 pm Reply

Can This Product Be Diluted to A certain Ratio depending upon Needs and does it Contain Any Wax?…

N English

Nov 11, 2019, 6:44 am Reply

looks too watery compared to the ones i trust


Dec 12, 2019, 4:44 pm Reply

can it be used as a shampoo? like ONR ? ex 30ml per 8 liters ?

Leave a Reply