재봉틀 없이 마스크 만들기/ 일회용 마스크 만들기/SBS오뉴스 소개 /How to make a mask/ 키친타월 마스크/ 빨아 쓰는 행주 마스크/ 코로나 마스크/ 미세먼지 마스크
Hello, everyone. This is Dadada TV in Dadada Sewing Studios.
Today, I’m going to use this sucking dish to make a mask. These days, it is hard to get masks because of Corona, so a region (Jeju Island) in Korea made masks using kitchen towels and distributed them to residents. I don’t know if the kitchen towel or the sponge mask is really working or hygienic. I’m not recommending you to make this mask and wear it. I would like to introduce how to make a mask using simple material even without a sewing machine. I bought it from Daiso.
I bought it because there was no pattern. Even if you apply force, it doesn’t tear easily. Regular paper kitchen towels tear easily.
The round rubber bands were bought at Daiso. Because the rubber band is 5M long, you can make about 10 masks. It’s affordable to make. I will use this rubber band because it is prettier than the yellow one. Let’s get started with the video. Use the bumpy side of the face on the outside.
The original size is 30cm by 30cm. Please cut the side by 5cm. After you cut it, spread it out so that you can see the inside.
Fold the bottom part 1.5cm. Fold it in half like this.
Please open it again. Place a string of wire ties or bread envelopes on top of the folds. Use a non-toxic glue gun when pasting (tape, stapler, sewing available). Attach the wire to the bottom 1.5cm. Lightly glue the glue gun to the side. Fold it in half again. Apply a glue gun to the bottom as well. You don’t have to be meticulous. The 1.5 cm upward part is the back.
Fold it in thirds at this state. Please spread it out and turn it upside down. I’ll draw it with a pen to make it look easy. Fold the blue line in the middle to match the top and attach it with a glue gun. Fold the bottom part and attach it with a glue gun so that the top is centered. The latter part looks like it’s meeting each other.
Do the same for the other side. Lightly glue the glue gun because the back part moves. It looks like this. I’m gonna flip it over and put a rubber band in your ear. Cut the rubber band in the right length for your face. I cut it to 22cm. Please tie the knot twice. Make these two, please.
When the rubber band is folded in half, it is approximately 9.5 cm. Fold both ends to 1.5cm while upside down. Open the ends slightly while folding them. There’s a dishcloth that you can wash out with the folded end.
Place the knot in the rubber band between the folds and attach the glue gun. Fold again by attaching a glue gun to the end of the fold. Do the same for the other side. When you’re done, open the middle and you’re done.
It bends well around the nose and chin. This is what the front looks like.
Open your balance, please. Make sure it fits your nose and chin. I’ve been working on this.
I’ve made several, but I think this is the prettiest shape. I like the white rubber band, and the rubber band is strong, so I think I can use it again if it’s a waste. It has two layers and is thick.
I showed it to my family and they said it was natural. I think it’s okay to go out in front of the house.
I made a mask easily without a sewing machine. If you have any questions or items you want to make, please leave a comment. Thank you. Please subscribe.